Will it Burn? CNT Yarn vs Stainless Steel Thread

This video highlights the high temperature stability of CNT yarns compared to stainless steel thread by applying a 1430 C butane torch to both materials. The stainless steel thread barely lasts 1 second before melting, while the CNT yarn survives the torch for more than 30 seconds without any visible damage.  The high thermal stability and superior thermal conductivity of the CNT material is most likely the reason that it is able to survive exposure to the flame from the torch.  The impressive thermal properties of CNT fibers and films make them highly promising for application in flame retardant materials such as those used in firefighter suits.

SBIR Funding Furthers DexMat CNT Technology

Source: Original article appears in the December 2018 issue of the Wire Journal International.
The feature on DexMat is on pages 48-50.

DexMat CNT Tape as Lightweight EMI Shielding

In this video we explain how DexMat’s carbon nanotube (CNT) tape has been used to replace the two EMI copper shielding braids typically used in RG316 cables. The performance of DexMat prototypes matches standard RG316 performance, while reducing the total weight of the cable by 50%!

The shielding effectiveness and insertion loss results for the CNT and Cu shielded cables are shown below. The CNT tape shielded cables have the following advantages:

  • Overall RG-316 cable weight reduction of CNT shielded vs. Cu double braid shielded cable without connectors is over 50%
  • CNT tape shield is 100 microns thick compared to 500 micron thick Cu double braid shield
  • Easy to apply CNT tape to coaxial as well as twisted pair type cables
  • Wide range of CNT tape widths and lengths are available for purchase
  • CNT tape shielded cables survive at least 1000 flex cycles with a minimum bend radius of at least 7.5X the jacketed cable diameter

Source: https://dexmat.com/cnt-products/cnt-tape-film/

Specification Sheet: DexMat fiber, tape, and cable specs Dec-2018

DexMat CNT Tape Shielded Cables Offer 50% Weight Reduction

Houston, TX- 12/11/2018. Working in collaboration with Minnesota Wire & Cable Company, DexMat has produced carbon nanotube (CNT) tape shielded RG-316 cables that perform comparably to copper (Cu) double braid shielded RG-316 cables. However, the CNT tape shields are 95% lighter than the copper double braid shields. The shielding effectiveness and insertion loss results for the CNT and Cu shielded cables are shown below. The CNT tape shielded cables have the following advantages:

  • Overall RG-316 cable weight reduction of CNT shielded vs. Cu double braid shielded cable without connectors is over 50%
  • CNT tape shield is 100 microns thick compared to 500 micron thick Cu double braid shield
  • Easy to apply CNT tape to coaxial as well as twisted pair type cables
  • Wide range of CNT tape widths and lengths are available for purchase
  • CNT tape shielded cables survive at least 1000 flex cycles with a minimum bend radius of at least 7.5X the jacketed cable diameter

Source: https://dexmat.com/cnt-products/cnt-tape-film/

Specification Sheet: DexMat fiber, tape, and cable specs Dec-2018