In this video we use a quick and easy experiment to demonstrate that our 5 cm wide carbon nanotube tape is able to effectively block cell phone signals. We have wrapped Tyson’s phone in 2 layers of this tape, which effectively blocks incoming calls due to the tape’s excellent electromagnetic shielding properties.
This video demonstrates the array of carbon nanotube tapes that DexMat currently produces. Strong, conductive, and flexible tapes or films up to 5 cm wide are currently available and even wider tape formats are currently under development.
These tapes have tremendous potential in applications ranging from EMI shielding in cables/electronics, to thermal interface materials, to heating elements or conductive materials in clothing or e-textiles.
This video shows how carbon nanotube (CNT) fibers can be assembled into yarns or ropes by plying the fibers together with a planetary ropemaking machine. These yarns are lightweight and highly flexible. They are also more conductive than stainless steel thread and much stronger than copper wire.
This video highlights the high temperature stability of CNT yarns compared to stainless steel thread by applying a 1430 C butane torch to both materials. The stainless steel thread barely lasts 1 second before melting, while the CNT yarn survives the torch for more than 30 seconds without any visible damage. The high thermal stability and superior thermal conductivity of the CNT material is most likely the reason that it is able to survive exposure to the flame from the torch. The impressive thermal properties of CNT fibers and films make them highly promising for application in flame retardant materials such as those used in firefighter suits.
In this video we explain how DexMat’s carbon nanotube (CNT) tape has been used to replace the two EMI copper shielding braids typically used in RG316 cables. The performance of DexMat prototypes matches standard RG316 performance, while reducing the total weight of the cable by 50%!
The shielding effectiveness and insertion loss results for the CNT and Cu shielded cables are shown below. The CNT tape shielded cables have the following advantages:
- Overall RG-316 cable weight reduction of CNT shielded vs. Cu double braid shielded cable without connectors is over 50%
- CNT tape shield is 100 microns thick compared to 500 micron thick Cu double braid shield
- Easy to apply CNT tape to coaxial as well as twisted pair type cables
- Wide range of CNT tape widths and lengths are available for purchase
- CNT tape shielded cables survive at least 1000 flex cycles with a minimum bend radius of at least 7.5X the jacketed cable diameter
Specification Sheet: DexMat fiber, tape, and cable specs Dec-2018
November 28, 2018. Out of the original 17 semi-finalists, DexMat was selected as one of 5 finalists to pitch at the 2018 SpaceCom Entrepreneur Summit in Houston, TX, for the opportunity to win the $100,000 Entrepreneur Challenge. As a runner-up, DexMat won $20,000 in Google Cloud Credits.
Last month we had the opportunity to show off our carbon nanotube yarns and films at the IdTechEx conference in Santa Clara, CA. In this video, Dmitri describes the various materials and applications that we spoke about at our booth. It was a great show, and we are excited to return to other IdTechEx events in the future!
This video highlights the high temperature stability of CNT yarns compared to copper wire by applying a 1430 C butane torch to both materials. The copper wire lasts about 5 seconds before melting, while the CNT yarn survives the torch for more than 30 seconds without any visible damage. The high thermal stability and superior thermal conductivity of the CNT material is most likely the reason that it is able to survive exposure to the flame from the torch. The impressive thermal properties of CNT fibers and films make them highly promising for application in flame retardant materials such as those used in firefighter suits.
Abstract: The above video demonstrates how carbon nanotube fibers are integrated into a spacesuit to help spacesuits mitigate dust contamination for future lunar and Mars missions.The spacesuit fabrication and testing was performed by researchers from the University of North Dakota, Boeing, and the NASA Glenn Research Center. CNT fibers were produced by DexMat.
Spacesuit dust mitigation has been a topic of high relevance and a critical path for future planetary exploration missions including Moon, Mars and Asteroids. A previous study demonstrated utilizing Carbon Nanotube (CNT) yarns as electrodes embedded into coupons made of spacesuit outer-layer material. When a multiphase Alternating Current (AC) voltage signal was applied to this material, the spacesuit fabric repelled greater than 80% lunar dust simulant with particle sizes between 10-75m in ambient conditions. As a continuation to this study, the feasibility of scaling the CNT embedded dust removal system on larger portions of spacesuit is investigated. A scaled prototype, representative of the knee joint section of a planetary spacesuit utilizing specifics of the NDX-2 lunar spacesuit developed by University of North Dakota was constructed. The outer-layer of this prototype is embedded with the CNT dust removal system and tested under various conditions. Fabrication of this system and results from the experiments using lunar dust simulant are detailed in this paper.
Above is a video demonstrating the performance of a badminton racket that uses strings made solely out of CNT yarn! The racket is strung with 700 micron diameter braided CNT yarn from DexMat.